Why PPSP Ltd Is Seeing a Surge in Removing Poor-Quality Pigeon Protection Installed by Solar Installers

As the demand for solar panels continues to rise across the UK, many solar installation companies have begun offering pigeon protection as an “add-on” service. While this may seem convenient for homeowners, PPSP Ltd has recently seen a sharp increase in callouts to remove and replace low-quality pigeon proofing systems installed during the original solar panel fitting.

More and more customers are contacting PPSP Ltd because the protective mesh or clips fitted by their installer have failed, come loose, broken down in bad weather, or simply weren’t installed correctly in the first place. This growing trend is costing property owners time, money, and unnecessary frustration—yet it’s avoidable with specialist workmanship.

Why Are Solar Installers’ Pigeon Protection Systems Often Failing?

Solar installers are experts in solar technology—not bird control. While many offer pigeon proofing, it is often installed:

1. As a quick add-on

Solar installers are on tight schedules, and pigeon proofing is sometimes added at the end without the care or detail needed for long-term protection.

2. With cheaper materials

To keep installation costs low, some companies use thin mesh, basic clips, or even adhesives that do not withstand UK weather.

3. Without specialist training

Bird-proofing solar panels requires an understanding of:

bird behaviour
non-invasive attachment methods
airflow requirements
roof angles and access safety
long-term weather resistance

This level of expertise is rarely part of standard solar installation training.

4. Using methods that can damage panels

Some non-specialists mistakenly use:

screws
drilled fixings
glued mesh
All of which can void warranties or risk damaging the panel frame.

5. With gaps pigeons can exploit

Improperly fitted protection often leaves:

open corners
loose clips
sagging mesh
small gaps pigeons can squeeze through

Pigeons only need a tiny opening to re-enter and rebuild nests.

Common Issues PPSP Ltd Finds When Removing Poor-Quality Mesh

PPSP Ltd is now routinely called to remove substandard pigeon protection systems. The same problems keep appearing, including:

✔ Mesh that has fallen off or blown away in storms

Lightweight materials simply don’t withstand harsh UK weather.

✔ Clips that fail, rust or snap

Cheap clips weaken over time, allowing pigeons to lift the mesh.

✔ Mesh installed too close to the roof

This traps moisture and debris, affects ventilation, and can reduce panel efficiency.

✔ Gaps at corners and edges

The most common failure—pigeons find entry points and nest again.

✔ Non-compliant methods risking warranties

Drilled or glued protection systems cause long-term problems.

✔ Pigeons returning within weeks

Many homeowners are shocked when birds come back soon after installation.

These issues force customers to pay twice: once for the original (poor) installation, and again for professional removal and replacement.

The Difference With PPSP Ltd: Specialist Pigeon Proofing Done Properly

PPSP Ltd specialises exclusively in non-invasive, long-lasting, professional pigeon proofing for solar panels. This focus ensures results that general solar installers cannot match.

What PPSP Ltd provides:

✔ Premium galvanised steel mesh

Long-lasting and weather-resistant.

✔ Specialist panel-safe clips

No drilling, no glues, no damage.

✔ Full perimeter sealing

No gaps, no weak spots, no bird entry points.

✔ Tailored installation for every roof type

Pitched, flat, slate, tile, complex layouts—handled with expertise.

✔ Experienced specialists

Dedicated pigeon-proofing experts with years of hands-on experience.

✔ Removal of old protection

Clean, safe removal of inadequate systems fitted by solar installers.

✔ Cleaning and sanitisation

Clear-out of nesting materials, droppings, and debris before new protection is fitted.

Why Homeowners Are Turning to Specialists Instead of Solar Installers

More customers report the same issues:

“The mesh kept falling off.”
“Pigeons got back underneath within weeks.”
“My installer didn’t use the right clips.”
“Storms destroyed the protection.”
“The installer didn’t specialise in bird control.”

This growing trend has made PPSP Ltd the preferred choice for anyone wanting durable, reliable, and professional pigeon proofing, backed by years of specialist experience.

SEO Optimised Keywords Used in This Blog

(Integrated naturally throughout)

pigeon proofing solar panels
remove poor quality pigeon protection
solar installer mesh problems
replacing failing solar panel bird mesh
solar panel bird control specialists UK
professional pigeon proofing system
solar array bird mesh replacement
non-invasive pigeon proofing
UK solar panel pigeon issues
weather-resistant bird mesh
expert pigeon proofing installation

The Increasing Trend: Poor Installations, Costly Consequences

The rise in cheap, quick-fit pigeon protection is creating long-term problems for homeowners. PPSP Ltd is seeing record numbers of customers needing:

removal of old pigeon mesh
repairs to damaged solar panel frames
cleaning of heavy bird debris
proper reinstallation using specialist methods

Homeowners are realising that pigeon proofing should be handled by a specialist, not a general solar installer.

Protect Your Solar Panels Properly—Choose a Specialist

If you’re experiencing:

mesh falling off
pigeons returning
clips breaking
gaps in your protection
damage caused by installer-fitted mesh

…then it’s time for a professional to put it right.

PPSP Ltd offers expert removal and replacement, ensuring your solar panels are fully protected with a long-lasting, high-quality system designed specifically for bird prevention.

<- Back to blog